EL with toothed-belt drive


ELZ

Sizes: 30, 40, 60, 60S, 80, 80S, 100, 125

Belt-driven mechanical linear unit with external roller guides.

Repeating accuracy: ± 0.1 mm
Travel speed:           max. 10 m/s

     


ELZex

Sizes: 40, 60, 60S, 80, 80S, 100, 125

Like ELZ, but suitable for use in potentially explosive atmospheres (see ATEX 95 marking).

Repeating accuracy: ± 0.1 mm
Travel speed:           max. 1 m/s

   


ELZG

Sizes: 30, 40, 60, 60S, 80, 80S

Mechanical linear unit with two external roller guides. The system is driven by a rotating toothed belt. One carriage is mounted on either side of the belt, so that two carriages move in opposite directions along the complete length of the guide profile.

Repeating accuracy: ± 0.1 mm
Travel speed:           max. 10 m/s

       

ELZZ

Sizes: 60, 60S, 80, 80S, 100, 125

Same function as ELZ, but each carriage is provided with a separate drive so that they can be moved individually. The toothed pulleys are divided in the centre and have separate bearings, so that two belts running parallel are each connected with one carriage.

Repeating accuracy: ± 0.1 mm
Travel speed:           max. 5 m/s

       

ELSZ

Sizes: 30, 40, 60, 60S, 80, 80S, 100, 125

Same function as ELZ, but with a driven carriage.

Repeating accuracy: ± 0.1 mm
Travel speed:           max. 6 m/s

      icon bild 50x50px  

ELSD

Sizes: 40, 60, 60S, 80, 80S, 100

Same function as ELSZ with a driven carriage. An additional rotating shaft integrated into the guide profile can be used to adapt grippers and other components.

Repeating accuracy: ± 0.1 mm
Travel speed:           max. 6 m/s

    

ELZT

Sizes: 40, 60, 60S, 80, 80S, 100

Same function as ELZ with a driven carriage. Two carriages move in opposite directions, so that a telescopic movement is achieved.

Repeating accuracy: ± 0.1 mm
Travel speed:           max. 6 m/s

    

ELHZ

Sizes: 60, 60S, 80, 80S, 100, 125

Mechanical linear unit with external roller guides, driven by an internal, completely covered toothed belt. The pin is positioned horizontally towards the carriage.

Repeating accuracy: ± 0.1 mm
Travel speed:           max. 8 m/s

     


ELVZ

Sizes: 60, 60S, 80, 80S, 100, 125

Mechanical linear unit with external roller guides, driven by an internal, completely covered toothed belt. The pin is positioned vertically towards the carriage.

Repeating accuracy: ± 0.1 mm
Travel speed:           max. 8 m/s

     

 


ELFZ

Sizes: 60S, 80S, 100, 125

Special lifting unit with external roller guides. The system is driven by a rotating toothed belt.

Repeating accuracy: ± 0.1 mm
Travel speed:           max. 4 m/s

    

ELFZex

Sizes: 60S, 80S, 100, 125

Like ELFZ. This positioning system is suitable for use in potentially explosive atmospheres (see ATEX -95 marking).

Repeating accuracy: ± 0.1 mm
Travel speed:           max. 1 m/s

   


ELZU

Sizes: 30, 40, 60, 60S, 80, 80S, 100

Area gantry, consisting of two Y-axes and one X-axis. The system is driven by a rotating toothed belt that runs around several deflection pulleys.

Repeating accuracy: ± 0.1 mm
Travel speed:  max. 6 m/s
Acceleration:   max. 20 m/s²

     

ELZI

Sizes: 30, 40, 60

X/Z-gantry consisting of a double guide on the horizontal X-level and a vertical Z-axis. The movements are achieved by external fixed drives via a rotating belt that runs around several deflection pulleys.

Repeating accuracy: ± 0.1 mm
Travel speed:           max. 5 m/s

      

NOTE! This site uses cookies and similar technologies.

If you not change browser settings, you agree to it.

I understand