|
|
 |
|
Positioning system ELZ 30, 40, 60, 80, 80S, 100, 125 |
 |
|
Mechanical
system with roll-guidings outside
of profile. System is belt driven.
Repeating accuracy:
± 0,1 mm
Velocity:
max. 10 m/sec
|
|
|
|
|
|
|
Positioning system ELZex |
|
|
Like
ELZ. The positioning system is suitable
for use according to the intended
purpose in potentially explosive areas
(see ATEX 95 marking).
Repeating accuracy:
± 0,1 mm
Velocity:
max. 10 m/sec
|
|
|
|
|
|
|
Positioning system ELZG 30, 40, 60, 80, 80S |
|
|
Mechanical
system with 2 roll-guidings outside
of profile. System is driven by one
rotating timing belt. At each end
of this belt a carriage is fixed.
Result is two carriages moving in
opposite direction over the complete
length of leading profile.
Repeating accuracy:
± 0,1 mm
Velocity:
max. 10 m/sec
|
|
|
|
|
|
|
Positioning system ELZZ 60, 80, 80S, 100, 125 |
|
|
Same
function as ELZ, but each carrier
with separate drive. Parted pulleys
are separately beared, so two parallel
moving belts are connected each with
one carriage.
Repeating accuracy:
± 0,1 mm
Velocity:
max. 5 m/sec
|
|
|
|
|
|
| Positioning
system ELSZ 30, 40, 60, 80, 80S, 100, 125 |
|
|
Same
function as ELZ, but with driven carriage.
Repeating accuracy:
± 0,1 mm
Velocity:
max. 6 m/sec
|
|
|
|
|
|
| Positioning
system ELSD 40, 60, 80, 80S, 100 |
|
|
Same
function as ELSZ. An additional turning
shaft is integrated into the leading-profile.
Grippers and other components can
be adapted to the shaft.
Repeating accuracy:
± 0,1 mm
Velocity:
max. 6 m/sec
|
|
|
|
|
|
| Positioning
system ELZT 40, 60, 80, 80S, 100 |
|
|
Same
function as ELZ. Two carriages are
moving in different
directions. Result is a telescopic
movement.
Repeating accuracy:
± 0,1 mm
Velocity:
max. 6 m/sec
|
|
|
|
|
|
| Positioning
system ELHZ 60, 80, 80S, 100, 125 |
|
|
Mechanical
system with roll-guidings outside
of profile. System is driven by an
internal belt. Position of shaft is
horizontal to the carriage.
Repeating accuracy:
± 0,1 mm
Velocity:
max. 8 m/sec
|
|
|
|
|
|
| Positioning
system ELVZ 60, 80, 80S, 100, 125 |
|
|
Mechanical
system with roll-guidings outside
of profile. System is driven by an
internal belt. Position of shaft is
vertical to carriage.
Repeating accuracy:
± 0,1 mm
Velocity:
max. 8 m/sec
|
|
|
|
|
|
| Positioning
system ELFZ 80S, 100, 125 |
|
|
Special
lifting system with roll-guidings
outside of profile. System is driven
by one rotating timing belt with one
drive.
Repeating accuracy:
± 0,1 mm
Velocity:
max. 4 m/sec
|
|
|
|
|
|
| Positioning
system ELZU 30, 40, 60, 80, 80S |
|
|
Surface portal, consisting of 2 Y-axes
and 1 X-axis, driven by one rotating
belt. This belt runs around different
deflection pulleys. Positioning is
achieved by two motors. The coordinate
is diagonally to deflection points
of Y-axes.
Advantage: Only small masses are moved,
so that high
acceleration can be realized.
Repeating accuracy:
± 0,1 mm
Velocity: max. 6
m/sec
Acceleration: max.
20 m/sec²
|
|
|
|
|
|
| Positioning
system MLZ 60, 80, 80S, 100 |
|
|
Mechanical system with roll-guidings
outside of profile. System is driven
by a belt inside of the profile.
Repeating accuracy:
± 0,1 mm
Velocity:
max. 8 m/sec
|
|
|
|
|
|
|
Nord-Süd-Str. 10a 
